§ 12D.3. Development standards.

12D.3.A. Landscaping.

1.

15-foot wide landscape strip along any property line adjacent to a public street when Article 4 of the Zoning Resolution otherwise specifies a smaller landscape strip:

(a)

The landscape strip may be as specified by the Fulton County Tree Preservation Ordinance, or may be a combination of hardscape elements (plazas, planters, benches, fountains and tables, etc.), ground cover, shrubs, and the required number of hardwood trees as specified by the Tree Preservation Ordinance.

(b)

Shrubs shall be a minimum height of 3 feet at time of planting.

(c)

A minimum of one 3" caliper hardwood shade tree is required for every thirty (30) linear feet of landscape strip.

2.

10-foot wide landscape strip along any interior property line adjacent to a nonresidential zoning and/or use.

3.

All landscaped areas shall be maintained by the property owner(s).

4.

Landscape treatments shall not obscure street addresses.

12D.3.B. Screening.

1.

Refuse areas shall be enclosed on four (4) sides with opaque fencing, 12 inches higher than the receptacle, and constructed of the same material as the building structure. One side shall be a self-closing gate. Refuse receptacles shall not be placed within 50 feet of an existing residential or AG-1 (Agricultural) zoning district.

2.

Accessory site features are prohibited in the front yard of any property.

3.

Accessory site features located on the ground shall be screened from view from any public right-of-way, any residential use, or any residential or AG-1 zoning category by one of the following: placement behind the building, 100 percent opaque fencing, berm or vegetative screen planted to buffer standards.

4.

Accessory site features on a roof shall be screened by a parapet or other architectural feature or as approved by the Director of Environment and Community Development.

5.

When required, fencing material around detention/retention facilities shall be black or hunter green vinyl coated chain link fence.

6.

Retaining walls shall be faced with or constructed of stone, brick, or decorative concrete modular block only.

7.

Loading docks shall be screened by a continuous hedge of evergreen shrubs. Shrubbery shall be a minimum height of five (5) feet at time of planting. Shrubbery must be cared for under a continuous maintenance program. (Amended 07/02/03)

12D.3.C. Pedestrian Paths.

1.

Sidewalks are required along all public and private road frontages.

2.

Internal walkways (paths) are required from the public sidewalk to the main entrance of the principle use of the property and shall meet applicable Americans with Disabilities Act (ADA) standards for slope, width, texture, level differences, and ramps.

3.

Pedestrian paths may be constructed of either colored/textured materials or conventional sidewalk materials and shall be clearly identified.

4.

Pedestrian paths shall be illustrated on the site plan submitted at the time of application for a Land Disturbance Permit

5.

Paths shall be designed to minimize direct auto-pedestrian interaction.

6.

Paths shall be connected to signalized crosswalks where applicable.

7.

Paths shall be direct and convenient routes between points of origin (such as a bus stop) and destination (such as a shop, bank, etc).

8.

Street furniture shall be located outside the specified width of any pedestrian path.

12D.3.D. Building Materials and Architectural Treatments.

1.

Developments shall include architecture elements such as columns, arcades, covered entry-walkways, arches, facade offsets, windows, balconies, offset walls, clock towers, cupolas and/or courtyards.

2.

All buildings shall be brick, precast concrete, natural stone, cementitious stucco, tinted glass or horizontal clapboard siding (or an equivalent alternative treatment approved by the Director of Environment and Community Development). Exterior metal siding is allowed in industrially zoned districts but only on non-street-facing façades.

3.

The exterior wall materials of all structures except industrial buildings shall consist of a minimum of 60 percent (per vertical wall plane) of the following: horizontal clapboard siding, brick or stone (or an equivalent alternative treatment approved by the Director of Environment and Community Development).

4.

Accent wall materials of glass, architecturally treated concrete masonry, precast stone, or stucco (or an equivalent alternative treatment approved by the Director of Environment and Community Development) shall not exceed 40 percent per vertical wall plane.

5.

The principle entry area of a building shall be articulated and express greater architectural detail than other portions of the building.

6.

Exterior finishes for accessory structures shall be consistent with the principle structure.

7.

Permitted colors for exterior walls, building components, sign structures, accent and decorative elements shall be as specified by Table 12D or as approved by the Director of Environment and Community Development.

Table 12D
Allowable Architectural Treatment, Accent and Trim Colors for the Old National Overlay District
(Reference Pantone Color Formula Guide)

Red Tones	Blue Tones	Yellow Tones	Green Tones	Brown Tones	Gray Shades	Black Shades
162 C	270 C	100 C	3288 C	406 C	420 C	432 C
1625 C	271 C	101 C	3298 C	407 C	421 C	433 C
1635 C	275 C	107 C	336 C	408 C	422 C	Cool Gray 11
180 C	2706 C	113 C	348 C	409 C	423 C	432 U
1805 C	2726 C	117 C	349 C	410 C	424 C	433 U
1815 C	2756 C	120 C	357 C	411 C	425 C	438 U
434 C	2707 C	121 C	364 C	438 C	427 C	439 U
435 C	2717 C	122 C	365 C	439 C	428 C	440 U
436 C	2727 C	1205 C	366 C	Warm Gray 10 C	429 C
437 C	2708 C	1215 C	372 C	Warm Gray 9 C	430 C
691 C	277 C	127 C	441 C	Warm Gray 6 C	431 C
697 C	278 C	128 C	442 C	719 C	Cool Gray 1 C
	2758 C	134 C	443 C	720 C	Cool Gray 2 C
	283 C	135 C	444 C	722 C	Cool Gray 3 C
	290 C	1345 C	445 C	726 C	Warm Gray 1 C
	291 C	1355 C	614 C	728 C	Warm Gray 1 U
	317 C	1365 C	615 C		Warm Gray 2 U
	324 C	141 C			Cool Gray 1 U
	656 C	142 C
		143 C
		148 C
		149 C
		155 C
		156 C

 

8.

Neon lights outlining and/or detailing building features are prohibited.

9.

Roof colors shall be black, gray, brown, or green. Reflective and metallic colors are prohibited.

10.

Cinder block, corrugated steel, wood siding, exposed plywood and exposed pressboard are prohibited as exterior finishes.

11.

Flat roofs and roof-mounted equipment shall be screened from the view of public and private streets by a parapet. No parapet shall be required to be greater than 4 feet above roof.

12.

Burglar bars, steel gates, metal awnings and steel-roll down curtains are prohibited on the exterior and interior of the structure except at the structure's rear.

13.

Chain link fencing is prohibited except in retention/detention areas. All chain link fencing must be black or green vinyl clad.

14.

Vending machines, paper stands, and other similar devices must be located inside a building.

12D.3.E. Miscellaneous Provisions. (Amended 03/03/04)

1.

Previously disturbed vacant lots shall not be paved unless it is a pre-existing condition.

2.

Vacant lots shall not be overgrown (vegetative cover exceeding 6-inches in height) and must be maintained. The lot must remain free of trash and debris.

3.

All openings of abandoned structures shall be secured from unauthorized entry.

4.

All fabricated boards used to board up all openings of abandoned structures shall be painted on the exterior surface the same color as the building.

5.

All garbage, trash, and other debris shall be removed from the interior and exterior of vacant premises.

6.

A deadbolt shall be installed on the front exterior door above the existing lock of an abandoned structure.

7.

Except as provided for in Article 19, the storage and/or sale of goods is prohibited in parking lots and other areas outside of the interior or permanently sheltered portions of a building. (Amended 03/03/04)

8.

Shopping carts shall be stored inside the structure or in parking lot receptacles.

12D.3.F. Architectural Review Process (Added 03/03/04)

1.

At the time of application for rezoning and/or use permit, a land disturbance permit or a building permit, the applicant will be directed to the community for a review of Old National Overlay Design Standards. The community will be allowed ten working days to review and comment. An application which otherwise conforms to applicable codes and regulations shall not be delayed issuance of a permit for more than 10 working days due to this review and comment period.

2.

Prior to the issuance of a building permit, the applicant shall submit samples of exterior materials, colors, design and architectural details of proposed building(s) and demonstrate compliance with the architectural design standards set forth in this ordinance.

3.

Fulton County staff will review land disturbance, exterior building and sign permit applications for compliance with the Old National Highway Overlay District. Upon determination of compliance, a Certificate of Endorsement (COE) will be provided in the form of signing the formally submitted plans and drawings.

(Amd. No. 11-0478, 6-1-11)